1 Safety
5
1.01 Directives
5
1.02 General Safety Instructions
5
1.03 Safety Symbols
6
1.04 Special Points Of Attention For The Owner-Operator
6
1.05 Operating Personnel And Technical Staff
7
1.05.01 Operating Personnel
7
1.05.02 Technical Staff
7
1.06 Danger Warnings
8
2 Proper Use
9
3 Technical Data
10
3.01 939 U; 3704-2/
10
4 Disposal Of The Machine
11
5 Transport, Packaging And Storage
12
5.01 Transport To The Customer's Premises
12
5.02 Transport Within The Customer's Premises
12
5.03 Disposal Of The Packaging Materials
12
5.04 Storage
12
6 Work Symbols
13
7 Operating Controls
14
7.01 Main Switch
14
7.02 Keys On The Machine Head (Only In Machines With A F Lange Motor)
14
7.03 Adjusting Levers For Zigzag Stitch And Needle Position
15
7.04 Reverse-Feed Key
15
7.05 Stitch Length Adjusting Wheel
16
7.06 Thumb Wheels For The Differential Feed (With The 939 U)
16
7.07 Adjusting Lever For The Differential Feed (With The 3704)
17
7.08 Adjusting Wheel For Multi-Stitches And Zigzag Stitches (Only On The 939 U)
17
7.09 Lever To Raise The Sewing Foot
18
7.10 Mechanical Edge Guide (Only On The 3704-2/02)
18
7.11 Knee Lever (Only On The 939 U)
19
7.12 Knee Switch (Only On The 3704-2/
19
7.13 Pedal (On The 939 U)
20
7.14 Pedal (On The 3704-2/
20
7.15 Control Panel (Only In Machines With P40 Cd)
20
8 Set-Up And Initial Start-Up
21
8.01 Set-Up
21
8.01.01 Setting The Table Height
21
8.01.02 Inserting The Sewing Machine Into The Stand
22
8.01.03 Assembling The F Lange Motor
23
8.01.04 Mounting The F Lange Motor Belt Guard
23
8.01.05 Mounting The Machine Cover
24
8.01.06 Assembling The Anti-Tipping Device
24
8.01.07 Mounting The Start Inhibitor
25
8.02 Connecting The Plug-In Connections And Ground Cable
26
8.03 Assembling The Reel Stand
27
8.04 Initial Start-Up
28
8.05 Switching The Machine On / Off
29
8.06 Machine Drive Home Position
29
9 Set-Up
30
9.01 Inserting The Needle
30
9.02 Winding The Bobbin Thread / Adjusting The Bobbin Thread Tension
31
9.03 Removing / Inserting The Bobbin Case
32
9.04 Inserting The Bobbin Case / Adjusting The Bobbin Thread Tension
32
(With The 939 U And 3704-2/03)
33
9.06 Threading The Needle Thread / Adjusting The Needle Thread Tension
34
9.07 Setting The Zigzag Stitch And Needle Position
35
9.08 Setting Stitch Lengths
35
9.09 Setting The Differential Feed (With The 939 U)
36
9.09.01 Sewing Without Fullness
36
9.09.02 Continually Incorporating Fullness
36
9.09.03 Occasionally Incorporating Fullness
37
9.09.04 Continually Stretching The Top Ply
37
9.10 Setting The Differential Feed (With The 3704-2/
38
9.11.01 Change-Over From Zigzag Stitch To Multi-Stitch
39
9.11.02 Change-Over From Multi-Stitch To Zigzag Stitch
39
10 Maintenance And Care
40
10.01 Maintenance Intervals
40
10.02 Cleaning The Machine
40
10.03 Oiling The Hook
41
10.04 Oiling The Zigzag Drive
42
10.05 Checking / Setting The Air Pressure
43
10.06 Emptying / Cleaning The Maintenance Unit's Water Tank
43
10.07 Parameter Settings
44
11 Table Top
45
11.01 Table Top Cutout
45
11.02 Table Top Assembly
46
12 Wearing Parts
47
Diskussion
Efterlad en kommentar eller stil et spørgsmål
Deltag i diskussionen
Stil et spørgsmål om brugsanvisningen eller tilføj et nyttigt svar til andre brugere.