Appliance is in demonstration mode Deactivate demonstration mode. See Programming section.

Miele KM 6352 - FE 44

Overheating protection on induction coils or cooling elements has triggered See overheating protection section. Allow appliance to cool down.

System lock is activated Deactivate the system lock. See Safety lock / System lock section.

Miele KM 6352 komfur Brugsanvisning

Q: Miele KM 6352 - FE 47

Cooling fan is blocked or faulty Ensure the fan has not been blocked by objects like a fork. Remove the cause of blockage. If the fault persists, contact the Miele Service Department.

Q: Miele KM 6352 - FE 48

Cooling fan is blocked or faulty Ensure the fan has not been blocked by objects like a fork. Remove the cause of blockage. If the fault persists, contact the Miele Service Department.

Brug læseren nedenfor til at læse Miele KM 6352 komfur brugsanvisningen. Du kan bladre gennem brugsanvisningen direkte på siden og bruge vores læsers funktioner til at finde alle vigtige oplysninger om installation, betjening og vedligeholdelse af denne Miele komfur.

Brugsanvisning

Fuld skærm

Del denne brugsanvisning Miele

WhatsApp Email

Var denne brugsanvisning nyttig?

Fejlkoder

Nedenfor finder du fejlkoderne for Miele KM 6352.

dE other

INFORMATION

Appliance is in demonstration mode

Løsning

Deactivate demonstration mode. See Programming section.

FE temperature

ADVARSEL

Overheating protection mechanism triggered on induction coils or cooling elements

Løsning

Allow the appliance to cool down. The cooking zones will be usable again when the fault code disappears. If it triggers repeatedly, contact the Service department.

FE 44 temperature

ADVARSEL

Overheating protection on induction coils or cooling elements has triggered

Løsning

See overheating protection section. Allow appliance to cool down.

FE 47 fan

ADVARSEL

Cooling fan is blocked or faulty

Løsning

Ensure the fan has not been blocked by objects like a fork. Remove the cause of blockage. If the fault persists, contact the Miele Service Department.

FE 48 fan

ADVARSEL

Cooling fan is blocked or faulty

Løsning

Ensure the fan has not been blocked by objects like a fork. Remove the cause of blockage. If the fault persists, contact the Miele Service Department.

LC other

INFORMATION

System lock is activated

Løsning

Deactivate the system lock. See Safety lock / System lock section.

Fejlfinding

Praktiske tips til at løse de mest almindelige problemer med Miele KM 6352.

Hob or cooking zones cannot be switched on power

Årsag: Mains fuse has tripped or there is a technical fault

Løsning

Reset the trip switch in the mains fuse box (minimum fuse rating - see data plate). If fault persists, disconnect the appliance from electricity for approx. 1 minute, reset the trip switch, and switch back on. If still not working, contact a qualified electrician or Miele Service Department.

Smell and vapours are given off when a new appliance is being used other

Årsag: Normal for new appliances

Løsning

The smell and vapours will be less noticeable with each subsequent use before dissipating completely.

Power levels 1 to 9 flash performance

Årsag: No pan on the cooking zone or the pan is unsuitable

Løsning

Use a suitable pan. See Pans section.

Cooking zones do not heat up or switch off automatically temperature

Årsag: A cooking zone has been in use for too long or overheating protection mechanism has triggered

Løsning

Switch the cooking zone back on to use it again. See Safety switch-off and Overheating protection sections.

Power level 9 is automatically reduced when selected on two linked or extended zones simultaneously performance

Årsag: Operating both zones at power level 9 would exceed the permitted maximum power level for the two zones

Løsning

Use lower power levels or operate zones sequentially.

Hob switches off while in use and F flashes in timer display maintenance

Årsag: One or more sensors have been covered by finger contact, food boiling over, or an object such as an oven glove

Løsning

Clean the control panel or remove the obstruction. See Safety switch-off section.

Food in the pan does not heat up when Auto heat-up function is switched on performance

Årsag: Too much food in the pan or pan is not conducting heat properly

Løsning

Start cooking at the highest power level and then turn down to a lower one manually later on.

Cooling fan continues to run even after appliance has been switched off other

Årsag: Normal operation - appliance is cooling down

Løsning

The fan will continue running until the appliance has cooled down, then switch itself off automatically.

Sensors are over-sensitive or do not react at all maintenance

Årsag: Sensitivity level of sensors has changed or sensors are affected by light or obstructions

Løsning

Ensure no direct light (sun or artificial) falls on the hob and surrounding area is not too dark. Check that nothing is covering the sensors or hob. Remove any pans and wipe away food deposits. Interrupt power supply for approx. 1 minute. If problem persists, contact Miele Service department.

Other fault messages starting with FE other

Årsag: Electronic fault in the appliance

Løsning

Interrupt the power supply to the hob for approx. 1 minute. If the problem persists after reconnecting, contact the Miele Service department.

Ofte Stillede Spørgsmål

De mest almindelige spørgsmål om Miele KM 6352.

Kontrollér at hovedsikringen ikke er sprunget. Nulstil kontakten i sikringskassen (minimumsværdien skal passe til typeskiltet). Hvis problemet består, skal du frakoble apparatet fra strømmen i cirka 1 minut, nulstille sikringen og tænde apparatet igen. Hvis det stadig ikke virker, kontakt en kvalificeret elektriker eller Miele-serviceafdelingen.

Kontrollér at der er en passende pande på kogezonen. Brug en egnet pande (se afsnittet om pander). Hvis kogezonen har været i brug i længere tid, kan du bruge den igen ved at tænde den igen. Se afsnittet om automatisk afbrydelse.

FE angiver elektroniske fejl. FE 44 betyder at overophedningsbeskyttelsen på induktionsspolen eller kølingselementerne er udløst. FE 47 eller FE 48 betyder at kølingsviften er blokeret eller defekt. Lad apparatet køle ned. Hvis fejlen fortsætter, kontakt Miele-serviceafdelingen.

Lad kogepladen køle ned til stuetemperatur før rengøring. Tørk grove forureninger af med en fugtig klud. Brug en Miele keramisk og rustfrit stål kogepladerenser (se valgfri tilbehør) med køkkenpapir eller en ren klud. Tør derefter med en fugtig klud og poler med en blød, tør klud. Undgå opvaskemiddel, sure rensemidler, slibende midler og skarpe genstande.

Undgå opvaskemiddel, rensemidler med sodabikarbona, alkalier, ammoniak, syrer eller klorider, slibende rensepulvere, rustfjernere, solvent-baserede midler, diskmaskinrenser, grill- og ovnrenser, glasrenser, hårde børster, spunges med slibende midler og skarpe genstande som kan beskadige forsegling.

Det er normalt. Viften vil fortsætte med at køre indtil kogepladen er kølet ned til en sikker temperatur, hvorefter den automatisk slukker.

Overophedningsbeskyttelsen kan udløses af: opvarmning af en tom pande, fedtkogning ved høj effekt, utilstrækkelig ventilation under apparatet, eller en varm kogezone efter et strombrud. Hvis beskyttelsen udløses igen, kontakt serviceafdelingen.

'LC' betyder at systemlåsen er aktiveret. Deaktivér systemlåsen ved at se i afsnittet om sikkerhedslås/systemlås.

'dE' betyder at kogepladen er i demonstrationstilstand. Deaktivér demonstrationstilstanden ved at se programmeringssektionen.

Hjælp

Har du spørgsmål om komfur KM 6352 fra Miele? Stil dem direkte til vores ekspert! Du får information, praktiske tips og skræddersyede løsninger på få sekunder.

Nedenfor finder du brugsanvisninger til komfur der ligner KM 6352. Prøv også at se alle Miele komfur brugsanvisninger